CASE CONSTRUCTION CX26C - Unloading Machine from Transport Trailer

5-TRANSPORTOPERATIONS
Unloadingthemachinefromatransporttrailer
Rearloadingtypetransporttrailer
1.Positionthetraileronrmandlevelground.Putblocks
atthetiresoftrailertopreventtrailerfrommoving.
2.Removewireropes,chocks,blocksandotherdevices
usedtosecurethemachineduringroadtransport.
3.Preparetheloadingramps.Iftherampsareincluded
inthetrailerframe,lowerthemtotheground.Ifthe
rampsareexternaltothetrailer,matchthemtothe
rearedgeofthetraileravoidinganybumpbetween
trailerbedandexternalramps.
NOTICE:therampslopeshouldbe15°orless.
4.Getonthemachineandstarttheengine.
5.Selectthelowtravelmode.
6.Raisethedozerbladeandoperatethearmandbucket
controlssothebottomofthebucketisabout20cm
(7.9in)abovethetrailerbed.
NOTICE:inthisposition,travelingandsteeringcontrol
becomeoppositetoeachother.
7.Travelslowlytowardsthebackofthetrailerandstop
asyoureachtheramps.Operatetheboomandthe
armsoftlyinordertogetthebucketclosetotheground
aheadoftheramps.
NOTICE:avoidfullyextendingthebucketcylinderto
preventdamagingitduetoaccidentalimpactswiththe
ground.
8.Movedownonrampswithextremecarewhileoperat-
ingtheboomandthearmsoftlyinordertokeepthe
bucketclosetothegroundandsotograntmachine
stability.
9.Passthroughtherampscompletelyandstopthema-
chineonceitgetsontheground.
SMIL16MEX0405AA1
5-4