Remote X.3 Parameters (Constrained List)
This field selects whether Router sets the remote X.3 parameters when
making an X.25 connection.
ENABLED - Set remote X.3 parameters
DISABLED - Do not set remote X.3 parameters
Echo (Constrained List)
This field selects whether the local device will echo characters. With this
option disabled it is assumed that the remote device will echo all
characters.
ENABLED – Echo
DISABLED – No Echo
Char Forwarding (Free Format, 3)
This field is optional. It allows defined sets of characters received to be
recognised by Router as an indication to forward packets.
0 No data forwarding character.
1 Alphanumeric characters (a-z, A-Z, 0-9).
2 Character CR.
4 Characters ESC, BEL, ENQ, ACK.
8 Characters DEL, CAN, DC2.
16 Characters ETX, EOT.
32 Characters HT, LF, VT, FF.
64 All other characters under the heading 'Name' of the ASCII table
(Appendix D) not included above.
126 All characters under the heading 'Name' of the ASCII table
(Appendix D) and DEL character.
Values may be added or subtracted: for example
10 would forward on
characters DEL, CAN, DC2, CR, (8
+2); and 124 would forward all
characters under the heading 'Name' except CR (126–2).
Forward Timeout (Free Format Text, 3)
This field is optional. It allows Router to forward packets after a specified
time regardless of the forwarding character. The time indicated is in
twentieth of a second and is disabled by setting it to 0.
X.3 Parameters
The values shown for the X.3 parameters Echo, Char Forwarding and
Forward Timeout are initial values and may be changed during the
connection.
X870-300351 Issue 1 4-23 Rev.0
To Next Page
