P-100
Program 3
4-2-5-5 Programming function control 2 by range
Operation
5. Select “5. Allowed function 2” and press the <YES> key.
6. Select an appropriate record and press the <YES> / <NO>
key.
7. After programming, press the <ESC> key to proceed to the
next step.
8. Enter the start range No. and press the <YES> key.
(It starts “0001” if you skip to enter the start range.)
Then enter the end range No. and press the <YES> key.
(It ends the last record if you skip to enter the end range.)
9. Press the <YES> key.
10. Press the <ESC> key to return to the previous menu.
Allowed function 2
Validation YES
Receipt YES
Check Endorsement YES
# YES
#/Non Sales YES
Non Sales YES
Number of Covers YES
Arrangement YES
Currency Exchange YES
VAT YES
Bill Copy YES´
0.00
Allowed function 2
SLIP Back Feed/Release YES¨
SLIP Print YES
SLIP Feed/Release YES
T/S YES
Table Number YES
Money Declaration YES
Tax Exempt YES
Menu Shift YES
Shift PLU YES
LC Open YES
Preset Open YES´
0.00
Allowed function 2
Preset Open YES¨
T/S YES
Table Number YES
Money Declaration YES
Tax Exempt YES
Menu Shift YES
Shift PLU YES
LC Open YES
Preset Open YES
1st unit price shift YES
2nd unit price shift YES
0.00
Range
Operation
1.Clerk Control
2.Menu Shift/2nd@
3.Mode Control
4.Allowed function 1
5.Allowed function 2
6.Allowed function 3
7.Allowed function 4
8.Allowed function 5 ´
0.00
Allowed function 2
Enter Start range 0
End range 0
OK? YES
0.00
Allowed function 2
Enter Start range 1
End range 123
OK? YES
0.00
To Next Page
Loading...
Need help?
General
