P-109
TE-7000S/8000F/8500F Programming Manual
Deletion
6. Select the first record you want to delete and press the <NO>
key.
7. Press the <YES> key.
8. Press the <ESC> key to return to the previous menu.
4-2-7 Programming clerk key ID
Operation
4. Select “7. Clerk Key ID” and press the <YES> key.
5. Touch the Dallas key with the receiver, and press the <YES>
key.
6. Select the appropriate clerk.
7. Repeat step 5 to 6, until completing this procedure.
8. Press <ESC> key to terminate the program and return to the
previous menu.
Clerk Detail
0001-030 0001-001 GROSS
0002-030 0002-001 NET
0003-030 0003-001 CAID
0004-030 0001-006 GROUP01
0005-030 0005-006 PLU0001
0006-030 0001-002 CASH
0007-030
0008-030
0009-030
0010-030
0.00
Clerk Detail
Memory No. 01-10 Delete OK? Yes
0.00
Clerk
Clerk
1.Clerk Feature
2.Operation
3.Commission Rate
4.Table Range
5.Range
6.Cashier Detail
7.Clerk Key ID
0.00
Clerk Key ID
1234567890AB
C
01
ABCDEFGHIJKL GLENN DEAL
0.00
Clerk Key ID
Clerk
1.(Key ID reset)
2.C01
3.GLENN DEAL
4.C03
5.C04
6.C05
7.C06
8.C07 ´
0.00
To Next Page
Loading...
