P-99
TE-7000S/8000F/8500F Programming Manual
4-2-5-4 Programming function control 1 by range
Operation
5. Select “4. Allowed function 1” and press the <YES> key.
6. Select an appropriate record and press the <YES> / <NO>
key.
7. After programming, press the <ESC> key to proceed to the
next step.
8. Enter the start range No. and press the <YES> key.
(It starts “0001” if you skip to enter the start range.)
Then enter the end range No. and press the <YES> key.
(It ends the last record if you skip to enter the end range.)
9. Press the <YES> key.
10. Press the <ESC> key to return to the previous menu.
Allowed function 1
Cash YES
Charge YES
Check YES
Credit YES
New Balance YES
Price Inquiry YES
Stock Inquiry YES
Character Recall YES
Character Print YES
Check Print YES
Clerk Transfer YES´
0.00
Allowed function 1
Table Transfer YES¨
Tip YES
Normal Receipt YES
Loan YES
Received on Account YES
Paid out YES
Pick up YES
Coupon YES
Deposit YES
Minus YES
% Minus YES´
0.00
Allowed function 1
Received on Account YES¨
Paid out YES
Pick up YES
Coupon YES
Deposit YES
Minus YES
% Minus YES
Plus YES
% Plus YES
Refund YES
Coupon2 YES
0.00
Range
Operation
1.Clerk Control
2.Menu Shift/2nd@
3.Mode Control
4.Allowed function 1
5.Allowed function 2
6.Allowed function 3
7.Allowed function 4
8.Allowed function 5 ´
0.00
Allowed function 1
Enter Start range 0
End range 0
OK? YES
0.00
Allowed function 1
Enter Start range 1
End range 99
OK? YES
0.00
To Next Page
Loading...
Need help?
General
