Casio TE-7000S - Programming Operation; Programming Clerk Control

P-84
Program 3
4-2-2 Programming operation
Preparation
4. Select “2. Operation” and press the <YES> key.
4-2-2-1 Programming clerk control
Operation
5. Select “1. Clerk Control” and press the <YES> key.
6. Select an appropriate clerk and press the <YES> key.
7. Select an appropriate record and choose options.
8. After programming, press the <ESC> key to return to the
previous menu.
Clerk
Clerk
1.Clerk Feature
2.Operation
3.Commission Rate
4.Table Range
5.Range
6.Clerk Detail
7.Clerk Key ID
0.00
Operation
Operation
1.Clerk Control
2.Menu Shift / 2nd@
3.Mode Control
4.Allowed function 1
5.Allowed function 2
6.Allowed function 3
7.Allowed function 4
8.Allowed function 5´
0.00
Clerk Control
Clerk Feature
1. C 01
2. C 02
3. C 03
4. C 04
5. C 05
6. C 06
7. C 07
8. C 08 ´
0.00
Memory No. 1
Check No. Compulsory NO
Table No. Compulsory NO
No. of Covers Compulsory NO
GST RCT Compulsory(Finalize) NO
GST RCT Compulsory(NB) NO
Slip Automatic Batch Print
Compulsory(Finalize) NO
SLIP Automatic Batch Print
Compulsory(NB) NO
Seat Number Compulsory NO
Eat-in/Take-out Compulsory NO
0.00