P-49
TE-7000S/8000F/8500F Programming Manual
Field meaning
1. Print additional items only:
Slip printing begins with “At the top of the transaction (Entire memory) / At the top of
this receipt (Additional only).”
Note: If you select “At the top of this receipt”, “Slip Auto Line Find” (the
next row) should be set to “YES”.
2. Slip Maximum Line (00 ~ 99)
Note: This line should be set.
3. Back feed after slip Print/Back feed after VLD Print / Back feed after CHK-END / PRT.
4-1-5-11 Programming the journal control
Operation
5. Select “11. Journal Control” and press the <YES> key.
6. Select the field you want to change and press the <YES> /
<NO> key.
7. After programming, you should press the <ESC> key to
return to the previous menu.
Field meaning
1. Storage of TRG operation into electronic journal memory:
Put training clerk registration data into electronic journal memory.
This program is also effective for training operation printing on journal.
2. Generate E-Journal full error:
Alert when the electronic journal memory becomes full/Not alert even if the electronic
journal memory becomes full.
3. Journal Compression Print:
Print journal by normal height character (“NO”), or by half height character (“YES”).
General Feature
General Feature
9.Hourly Sales ¨
10.SLIP / Guest
11.Journal Control
12.Message Control
13.Order Control
14.Set Menu/Condiment
15.CHK Tracking
16.Clerk Interrupt ´
0.00
Journal Control
Storage of TRG Operation into
E-Journal YES
Generate E-Journal full error NO
Journal Compressed Print NO
0.00
To Next Page
Loading...
Need help?
General
