P-93
TE-7000S/8000F/8500F Programming Manual
4-2-2-10 Programming X/Z report control
Operation
5. Select “10. Report” and press the <YES> key.
6. Select an appropriate clerk and press the <YES> key.
7. Select an appropriate record and press the <YES> / <NO>
key.
8. After programming, press the <ESC> key to return to the
previous menu.
Operation
Operation
3.Mode Control ¨
4.Allowed function 1
5.Allowed function 2
6.Allowed function 3
7.Allowed function 4
8.Allowed function 5
9.Arrangement
10.Report
0.00
Report
Clerk Feature
1.
C
01
2.
C
02
3.
C
03
4.
C
04
5.
C
05
6.
C
06
7.
C
07
8.
C
08 ´
0.00
Memory No. 1
Daily X YES
Daily Z YES
Periodic(1) X YES
Periodic(1) Z YES
Periodic(2) X YES
Periodic(2) Z YES
Batch X/Z(1) YES
Batch X/Z(2) YES
Batch X/Z(3) YES
Batch X/Z(4) YES
Batch X/Z(5) YES´
0.00
Memory No. 1
Batch X/Z(6) YES¨
Batch X/Z(7) YES
Batch X/Z(8) YES
Batch X/Z(9) YES
Batch X/Z(10) YES
Operator X YES
Operator Z YES
Individual totalizer X/Z YES
Individual X/Z (Key direct) YES
Individual X/Z (Others) YES
Employee X/Z YES´
0.00
Memory No. 1
Batch X/Z(7) YES¨
Batch X/Z(8) YES
Batch X/Z(9) YES
Batch X/Z(10) YES
Operator X YES
Operator Z YES
Individual totalizer X/Z YES
Individual X/Z (Key direct) YES
Individual X/Z (Others) YES
Employee X/Z YES
Employee Edit YES
0.00
To Next Page
Loading...
Need help?
General
