P-28
Program 4
Method 2
Operation:
In case of allocating different functions from the functions of the same location on the first
level menu sheet, turn the menu sheet or press the <MENU> key and allocate the function
on the menu sheet which you want to put.
1. Sign on a clerk (if necessary).
2. Put on the menu sheet you want to program.
3.
Press <PGM MODE> repeatedly or
“4” <PGM MODE> to
assign Program 4 mode.
4. Press the <YES> key.
5. Select “1. Key Assign” and press the <YES> key.
6. Select an appropriate function and press the <YES> key.
Then press the corresponding key*.
Or select an appropriate function by the function code list (see
the next page), enter record No. which is different from the
number in the first menu sheet (in 4-digits) and function code
(in 3-digits) and press the corresponding key.
* In case of presetting flat-PLU, record No. or random PLU
code is necessary. In case of presetting department/subde-
partment, record No. is necessary.
7. Press the <ESC> key to return to the previous menu.
P4
C
01 10-10-01 12:34 000001
PGM-4
1.Keyboard
0.00
Keyboard
Keyboard
1.Key Assign
2.Key Move
0.00
Key Assign
000.NOP 001.CASH 002.CHARGE
003.CHECK 004.CREDIT 006.NB
008.PRCINQ 009.STKINQ 010.CHAR
011.PRT 012.CHKP 013.CLK TRAN
014.TBL TRAN 015.TIP 016.NRMRCT
019.LOAN 020.RC 021.PD
022.P.UP. 023.COUPON 025.DEPOSIT
027.- 028.%- 029.+
030.%+ 033.RF 034.VOID
036.CPN2 037.VLD 038.RCT
039.CK.E 040.# 041.#/NS ´
0.00
To Next Page
Loading...
Need help?
General
