81
The ports supported by Microsoft Bluetooth Stack
Using Microsoft Bluetooth Stack
Power states of Bluetooth
COM5
COM9
For more details on ports, contact Technical Support Team at Catchwell.
Hard reset
Using Microsoft Bluetooth Stack
If you perform a hard reset, the Bluetooth wireless condition before hard reset remains.
Soft reset
Using Microsoft Bluetooth Stack
If you perform a soft reset, the Bluetooth wireless condition before hard reset remains.
Pause
Restart
If there is an active Bluetooth paring, the Bluetooth wireless connection enters low-power consumption mode to
maintain the active paring. If there is no active pairing, the Bluetooth wireless connection will be disconnected.
If Bluetooth was on before temporary suspension, it will be powered on when CW30 restarts.
In the next chapter, how to use Microsoft Bluetooth Stack will be explained.
Under the condition that the Bluetooth pairing between CW30 and other Bluetooth device is active,
if there is no data exchange between the devices, CW30 will be timed out. However, once the power
button of CW30 is pressed, CW30 will be temporarily suspended (except for the case of making a call),
and CW30 will be awake from the suspend mode right after receiving data from the Bluetooth device.
For example, if redialing is made from a headset, the suspension will be disengaged.
$BVUJPO
To Next Page
Loading...