93
Cleaning
Screen
Scanner window
Connectors
Cleaning the exterior of the device
Use only computer-cleaning detergents or dedicated cleaners.
Use only computer-cleaning detergents or dedicated cleaners. Be careful not to allow liquid to pervade into the gaps
at the corner of screen. To avoid any scratch, wipe it off with a non-abrasive dry cloth.
Clean it regularly with a lens cleaner.
If isopropyl alcohol is not available, clean the connector pins with computer-cleaning detergent or a pencil eraser, and
be careful not to leave any foreign materials at the surface of the pins.
1
2
3
4
Remove the battery.
Soak the end of a swap in isopropyl alcohol and rub connector pins with it.
Be careful not to leave any Àuff at the surface of connectors.
Repeat this process about three times.
To Next Page
Loading...