CET PMC-53A - Appendix G Standards Compliance; Safety Requirements; Electromagnetic Compatibility; Radio Disturbances

CET Electric Technology
101
Appendix G Standards Compliance
Safety Requirements
CE LVD 2014 / 35 / EU
cTUVus for UL/CSA Certification
EN61010-1: 2010
EN61010-2-030: 2010
UL 61010-1: 2012
UL 61010-2-030: 2012
CAN/CSA-C22.2 No.61010-1: 2012
CSA C22.2 No. 61010-2-030-12
Electrical safety in low voltage distribution
systems up to 1000Vac and 1500 Vdc
IEC 61557-12: 2008 (PMD)
Insulation
AC Voltage: 2.5kV @ 1 minute
Insulation Resistance: >100MΩ
Impulse voltage: 6kV, 1.2/50µs
IEC 62052-11: 2003
IEC 62052-22: 2003
Electromagnetic Compatibility
CE EMC Directive 2014 / 30 / EU (EN 61326: 2013)
Immunity Tests
Electrostatic discharge
EN 61000-4-2: 2009
Radiated fields
EN 61000-4-3: 2006+A1: 2008+A2: 2010
Fast transients
EN 61000‐4‐4: 2012
Surges
EN 61000‐4‐5: 2014
Conducted disturbances
EN 61000‐4‐6: 2009
Magnetic Fields
EN 61000‐4‐8: 2010
V Dips, Interruptions & Variations
EN 61000-4-11:2004
Oscillatory waves
EN 61000‐4‐12: 2006
Radio Disturbances
CISPR 22:2006, Level B
Emission Tests
Limits and methods of measurement of
electromagnetic disturbance characteristics
of industrial, scientific and medical (ISM)
radio-frequency equipment
EN 55011: 2009 + A1: 2010
(CISPR 11)
Limits and methods of measurement of
radio disturbance characteristics of
information technology equipment
EN 55022: 2010+AC: 2011
(CISPR 22)
Limits for harmonic current emissions for
equipment with rated current ≤16 A
EN 61000-3-2: 2014
Limitation of voltage fluctuations and flicker
in low-voltage supply systems for equipment
with rated current ≤16 A
EN 61000-3-3: 2013
Emission standard for industrial
environments
EN 61000-6-4: 2007+A1: 2011
Testing and measurement techniques - Ring
wave immunity test.
EN 61000-4-12: 2006
Radiated Emissions
FCC 47CFR 15.109 Class B
Conducted Emissions
FCC 47CFR 15.107 Class B
Mechanical Tests
Spring Hammer Test
IEC 62052-11: 2003
Vibration Test
IEC 62052-11: 2003
Shock Test
IEC 62052-11: 2003