CET PMC-53A User Manual

CET Electric Technology
11
1.3 PMC-53A’ application in Power and Energy Management Systems
The PMC-53A can be used to monitor 4P3W (Wye), 3P3W (Delta), 1P2W-Uln, 1P2W-Ull or 1P3W
connected power system. Modbus communications allow real-time data, DI status and other
information to be transmitted across a RS485 network to an Integrated Energy Management system
such as PecStar® iEMS.
1.4 Getting more information
Additional information is available from CET via the following sources:
 Visit www.cet-global.com
 Contact your local representative
 Contact CET Technical Support directly via email at support@cet-global.com

CET PMC-53A Specifications

General

Brand	CET
Model	PMC-53A
Category	Measuring Instruments
Language	English