CET PMC-53A - Page 29

CET Electric Technology
29
 When the password has been entered, pressing <F4>/<OK> will advance to the setup menu if the
password is correct.
2) Selecting a parameter to change:
 Press <F2>/<↑> or <F3>/<↓> to scroll to the desired sub-menu or parameter.
 Press <F4>/<Enter> to select the sub-menu or parameter.
 Repeat the step 2 until a setup parameter has been selected.
3) Changing and saving a setup parameter:
 For a Numeric parameter, press <F2>/<←> to shift the cursor to the left or <F3>/<↑> to increment
the numeric value
 For an Enumerated parameter, press <F2>/<←> or <F3>/<↑> to scroll backward and forward in the
selection list.
 After modification, press <F4>/<OK> to save the change into memory or <Cancel> to exit the
currently selected parameter without change.
 Repeat step 3) until all setup parameters have been changed.
4) Exiting the Setup Mode
 Press <F1>/<Esc> to return to the Display Mode.
 Also, the Setup Mode will be automatically exited if there is a period of inactivity of 1 minute or
longer.