CET Electric Technology
71
0 = Remote
Control/Setpoint*
1 = kWh Import
2 = kWh Export
3 = kWh Total
4 = kvarh Import
5 = kvarh Export
6 = kvarh Total
0 to 6000 (x0.1s),
10*
(0 = Latch Mode)
-999,999 to +999,999
(Default = 400)
-999,999 to +999,999
(Default = 2000)
-999,999 to +999,999
(Default =0)
-999,999 to +999,999
(Default = 0)
#
Available in Firmware V1.00.04 or later
Table 5-35 I/O Setup Parameters
Notes:
1) The Tariff Switch option is supported in Firmware V1.00.03 or later.
2) This is available only when the Basic Function option is “3” (4xDI and 2xRelay Output) or “A” (4xDI
and 2xSS Pulse Output). Please refer to the Ordering Guide for more details.
3) This is available only when Expansion Module B is equipped with the “B4” option (2xDI and 2xSS
Pulse Output). Please refer to the Ordering Guide for more details.
4) Analog Output Parameters:
The Units for Voltage, Current, kW, kvar, kVA and Frequency are V, A, kW, kvar, kVA and Hz,
respectively.
kvar Total Present Demand