EasyManua.ls Logo

CET PMC-53A - Page 9

CET PMC-53A
103 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CET Electric Technology
9
Advanced Measurements
1-Cycle Real-time U & I Waveform Display @ 1s update rate
U and I THD, TOHD, TEHD and Individual Harmonics up to 31st
Current TDD, TDD Odd, TDD Even, K-Factor and Crest Factor
U and I Unbalance and Phase Angles
Displacement PF
Fundamental U, I and kW per phase
Total Fundamental kW & Total Harmonic kW*
U and I Symmetrical (Sequence) Components*
kvarh Q1-Q4
Interval Energy for kWh/kvarh Imp/Exp and kVAh
Demands, Predicted Demands and Peak Demands for kW/kvar/kVA Total and per phase Current
with Timestamp for This Month (or Since Last Reset) and Last Month (or Before Last Reset)
Two TOU schedules, each providing
o 12 Seasons
o 20 Daily Profiles, each with 12 Periods in 15-minute interval
o 90 Holidays or Alternate Days
o 8 Tariffs, each providing the following information
· kWh/kvarh Import/Export, kVAh
· kW/kvar/kVA Max. Demands
12 Monthly Energy Logs of kWh/kvarh Import/Export/Total/Net, kVAh, kvarh Q1-Q4 as well as
kWh/kvarh Import/Export and kVAh per Tariff
*Available in Firmware V1.00.03 or later
Setpoints
9 user programmable Setpoints with extensive list of monitoring parameters including Voltage,
Current, Power and THD, etc.
Configurable thresholds, time delays and DO triggers
SOE Log
100 events time-stamped to ±1ms resolution
Recording events for Setup changes, Setpoint and DI status changes as well as DO operations
Max/Min Log
Max./Min. Log with timestamp for parameters such as Voltage, Current, In (calculated), I4, Ir,
Frequency, kW, kvar, kVA, PF, Unbalance, K-Factor, Crest-Factor and THD
Configurable for This Month/Last Month or Since/Before Last Reset
Freeze Logs (Optional)
60 Daily Freeze Logs for kWh/kvarh/kVAh Total and kW/kvar/kVA Peak Demands.
36 Monthly Freeze Logs for kWh/kvarh/ kVAh Total and kW/kvar/kVA Peak Demands with
Timestamp.
Data Recorder Log (Optional)
5 Data Recorders of 16 parameters each for real-time measurements, harmonics, energy, demand,
TOU, Pulse Counters…etc.
Recording interval from 1 minute to 40 days
Configurable capacity up to a max. of 100 days at 15-minute interval

Table of Contents

Other manuals for CET PMC-53A

Related product manuals