CG VSR239p5 - Page 56

Emotron VS Series Quick Start Guide
- 55 -
18: Designated count value
attained
19: Length attained
20: Under load alarm
21: Brake output
22: DI1
23: DI2
24: DI3
25: DI4
26: DI5(VSX Only)
27: DI6(VSX Only)
28: DI7
29: Digital comparator 1
30: Digital comparator 2
31: Analog comparator 1
32: Analog comparator 2
33: Timer 1
34: Timer 2
35: Timer 3
36: Timer 4
37: Timer 5
38: Timer 6
39: Timer 7
40: Timer 8
41: Timer 9
42: Timer 10
43: Timer 11
44: Timer 12
45: Frequency range is arrived
(FDT1 upper limit and lower
limit)
46: PID feedback loss
C1.04
Y1 output delay time
0.0～6000.0s
0.0s
△
C1.05
Y2 output delay time
(VSX Only)
0.0～6000.0s
0.0s
△
C1.06
R1 output delay time
0.0～6000.0s
0.0s
△
C1.07
R2 output delay time
(VSX Only)
0.0～6000.0s
0.0s
△
C1.08
Enabled state of digital
output
Unit's place: Y1
0000
×
0: Positive logic
1: Negative logic
Ten’s place: Y2
(same as unit's place)
Hundreds place: Relay 1 output
(same as unit's place)
Thousands place: Relay 2 output
(same as unit's place)
C1.09
Detection width of
frequency attained
0.00～20.00Hz
5.00Hz
×
C1.10
FDT1 upper bound
0.00～Fmax
30.00Hz
×
C1.11
FDT1 lower bound
0.00～Fmax
30.00Hz
×
C1.12
FDT2 upper bound
0.00～Fmax
30.00Hz
×
C1.13
FDT2 lower bound
0.00～Fmax
30.00Hz
×
C1.14
Consecutive running
time
0.0～6000.0Min 0.0:Disabled
0.0Min
×
C1.15
Accumulative power-on
time setting
0～60000h 0:Disabled
0h
×