Page 18
Programming Single Unit Overview
Programming Single Unit Overview
System Feedback / Responses (Beeps)
Direct Command Responses:
Voice Response Description
10 Short Beeps: Entrance 1-4 opened This is the command to latch open door 1
5 Short Beeps: Entrance 1-4 closed This is the command to keep the latch
closed for door 1
Visitor Responses:
Voice Response Description
10 Short Beeps: Access granted Access is granted from an entry code or
other code used on door 1. Access may
also be granted by a tenant on their touch
tone phone. The voice is played first then
the beeps
1 Long Beep: Access denied Access is denied from an entry code, card
code used or invalid password on door 1.
Access may also be denied by a tenant on
their touch tone phone
1 Long Beep: Invalid code Unknown entry or directory code on
door 1
2 Short Beeps: --- Indicates door 1 is already open
Busy Tones: --- Directory code in DND mode or resident line
is in use
1 Short Per Second: --- 1 beep is played per second for remaining
seconds during a call
2 Short Beeps: Program mode System acknowledges valid prefix/password
and is in program mode
Use up and down keys to While system is idle and the help key is
pressed
To Next Page
Loading...
