Page 21
Setup “Your Settings”
The units come preprogrammed with Factory Settings. When the unit is
first installed, you DO NOT need to program each feature.
Review the unit’s factory settings before programming (see Quick
Reference Guide, pages 4-8 for ALL the Factory Settings).
Change the Unit Password:
Recommended
Change the unit password to prevent any tampering with your system’s database. When changing
the password, save a copy of it in a secure location. If you lose the password, you will not be
able to enter into programming mode. Factory Setting: 000000
See page 56
SetUP "Your Settings"
SetUP "Your Settings"
Getting Started
Set the Clock:
Recommended
An accurate clock is critical to the proper use of schedules and for accurately reporting
transactions.
See page 52
Change the Unit’s ID and Chain Number for Multiple
Unit Configurations ONLY:
Recommended
The Unit ID number identifies each unit within the chain. Setting the "Unit ID" and "Number of
Units in the Chain" are required so Versa XS can send or receive data to/from the correct units
within the chain. Factory Setting: Unit ID Number "1" and Number of Units in
Chain "1".
See previous page
1
2
3
To Next Page
Loading...
