Chamberlain Elite EL2000 - Page 47

Page 46
Transmitters
Transmitters
Add or Edit a Full Function Transmitter:
1
Press Then
2
Enter Transmitter Number (1-65534). Then (#)
3
Enter Facility Code (0-255). Then (#)
4
Enter Sequence Code (0-2). Then (#)
5
Enter ID Number (0-26). Then (#)
6
Enter Button Number (1-4). Then (#)
Add or edit a full function transmitter. When adding a Full Function transmitter, it will default
as "active". To deactivate a transmitter, or to activate or deactivate on a specific time and
date, see Activate or Deactivate Transmitter (page 48).
Factory Settings: All Doors = 1 Full Access
7
Schedule for Door 1 (1-4). Then (#)
0=Full Restrictions 1=Full Access
8
Schedule for Door 2 (1-4). Then (#)
0=Full Restrictions 1=Full Access
9
Schedule for Door 3 (1-4). Then (#)
0=Full Restrictions 1=Full Access
10
Schedule for Door 4 (1-4). Then (#)
0=Full Restrictions 1=Full Access
Add or Edit a Group of Full Function Transmitters:
1
Press Then
2
Enter Starting Transmitter Number (1-65534).
Then (#)
3
Enter Ending Transmitter Number (1-65534).
Then (#)
4
Enter Facility Code (0-2545). Then (#)
5
Enter Sequence Code (0-2). Then (#)
6
Enter ID Number (0-26). Then (#)
7
Enter Button Number (1-4). Then (#)
Add a large number of transmitters at once to the system. The individual transmitters can be
edited later.
Factory Settings: Activate or Deactivate = 1 Activate;
All Doors = 1 Full Access
• Group transmitters must have the same Facility Code, Sequence Code, ID Number and
Active Button.
8
Activate (1) or Deactivate (0). Then (#)
9
Schedule for Door 1 (1-4). Then (#)
0=Full Restrictions 1=Full Access
10
Schedule for Door 2 (1-4). Then (#)
0=Full Restrictions 1=Full Access
11
Schedule for Door 3 (1-4). Then (#)
0=Full Restrictions 1=Full Access
12
Schedule for Door 4 (1-4). Then (#)
0=Full Restrictions 1=Full Access
94
91