Managing Internal Certificates
Quantum Spark 1500, 1600, and 1800 Appliances R81.10.X Locally Managed Administration Guide|144
Column Description
Status Cluster status of the interface:
Status Description
High
Availability
Two physical interfaces in 2
cluster members act as a single
interface toward the network,
using a single virtual IP address.
Note - In this cluster
solution, each interface has
a local IP address in
addition to the shared
single virtual IP address.
Sync Two physical interfaces must be
defined as Sync interfaces and
connected between the
members to allow proper failover
as needed. The default is to use
LAN2/Sync physical port.
Non HA This status is also called private.
The physical interface in this
member does not participate in
High Availability functions.
Monitored This status is also called private
monitored.
The physical interface on this
Cluster Member is not coupled
with another interface on the
other Cluster Member as in High
Availability interface mode.
The interface's status is still
monitored, and if a problem
occurs, the Cluster Member fails
over to the other Cluster
Member.
IP Address Cluster Virtual IP address configured on the interface.
Member IP Address Physical IP address configured on the interface.
To Next Page
