Configuring the Wireless Network
Quantum Spark 1500, 1600, and 1800 Appliances R81.10.X Locally Managed Administration Guide|80
To enable the wireless scheduler:
1. In the Wireless page, click Radio Settings.
The Wireless Radio Edit window opens.
2. Go to the Scheduler tab.
3. Move the slider to ON to enable the wireless scheduler.
To add new schedule settings:
1. In the Wireless Radio Edit window, click New.
2. Under Choose Days, select the specific days.
3. Click Apply
Wi-Fi Quality Analyzer
Background
The Wi-Fi Quality Analyzer detects the Wi-Fi networks near the appliance and shows the report with this
information:
n
Level of interference from other Wi-Fi networks on the current Wi-Fi channel.
n
Signal level for the Wi-Fi clients connected to this appliance.
Procedure
1. Connect to the command line on the Quantum Spark appliance.
2. Log in to the Expert mode.
3. Run the Wi-Fi Quality Analyzer:
wifi_quality
To Next Page
Loading...
