Check Point QUANTUM SPARK 1600 - Wireless Active Devices; Paired Mobile Devices; Viewing Infected Devices

Configuring External Log Servers
Quantum Spark 1500, 1600, and 1800 Appliances R81.10.X Locally Managed Administration Guide|306
Wireless Active Devices
The Logs & Monitoring view > Status section > Wireless Active Devices page shows the devices
connected to your gateway's wireless network.
The information for each connected device's network usage includes:
n
SSID – Name of the WiFi network
n
Type - Shows the connection type a device is connected with over WiFi.
Note - In the R81.10.X releases, this feature is available starting from the R81.10.05 version.
n
Channel
n
Frequency
n
Signal Strength
n
RSSI – Received Signal Strength
n
Bandwidth
n
IP Address
n
MAC address
Paired Mobile Devices
The Logs & Monitoring > Paired Mobile Devices shows the mobile devices paired to the gateway.
To revoke a pairing:
1. Select the device name.
2. Click Revoke.
3. In the confirmation window that opens, click Yes.
Viewing Infected Devices
See "Viewing Infected Devices" on page201 .