Check Point QUANTUM SPARK 1600 - Active Directory; To add an Active Directory domain

Managing Authentication Servers
Quantum Spark 1500, 1600, and 1800 Appliances R81.10.X Locally Managed Administration Guide|282
To configure a TACACS+ server administrator
1. Click the Users & Objects view > Users Management section > Administrators page.
2. In the line Administrator TACACS+ authentication is, click Edit permissions.
3. Select Enable TACACS+ authentication for administrators.
4. Select one of these:
n
Use roles defined on TACACS+ server
n
Use default role for TACACS+ users
In the Default Administrators Role, select the applicable role.
5. Click Apply
Active Directory
To add an Active Directory domain
1. Click the Users & Objects view > Users Management section > Authentication Servers page.
2. In the section Active Directory section, click New.
3. Enter this information:
n
Domain - The domain name.
You cannot create another object with the same Domain as an existing Active Directory
domain object.
n
IP address - The IP address of one of the domain controllers of your domain.
n
User name - The user must have administrator privileges to ease the configuration process
and create a user based policy using the users defined in the Active Directory.
n
Password - The user's password.
Note - You cannot use these characters in a password or shared secret: { } [
] ` ~ | ‘ " \ (maximum number of characters: 255)
n
User DN - Click Discover for automatic discovery of the DN of the object that represents
that user or enter the user DN manually.
For example: CN=John James,OU=RnD,OU=Germany,O=Europe,DC=Acme,DC=com
4. Select Use user groups from specific branch only if you want to use only part of the user
database defined in the Active Directory.
a. Click New.
b. Enter the branch in the Branch full DN in the text field.
c. Click Apply
5. Click Apply