Check Point QUANTUM SPARK 1600 - Wireless Scheduler

Configuring the Wireless Network
Quantum Spark 1500, 1600, and 1800 Appliances R81.10.X Locally Managed Administration Guide|79
l
Auto - Use the DNS configuration of the device
l
Use the following IP addresses - Enter the first, second and third DNS servers
n
Default Gateway
Select one of these options:
l
Use this gateway's IPaddress as the default gateway.
l
Use the following IP address - Enter an IP address to use as the default gateway.
n
WINS
Select one of these options:
l
Use the WINS servers configured for the internet connection
l
Use the following WINS servers - Enter the IP addresses of the First and Second WINS
servers.
n
Lease
Lease time - Configure the timeout in hours for a single device to retain a dynamically acquired IP
address.
n
Other Settings
You can optionally configure these additional parameters so they will be distributed to DHCP
clients:
l
Time servers
l
Call manager
l
TFTP server
l
TFTP boot file
l
X Window display manager
l
Avaya IP phone
l
Nortel IP phone
l
Thomson IP phone
n
Custom Options
Lets you add custom options that are not listed above.
For each custom option, you must configure the name, tag, type, and data fields.
When you finish editing the network, click Apply.
Wireless Scheduler
You can set scheduled times for the WiFi to be on and off and differentiate between radio bands (2.4GHz
and 5GHz).
Use Case: Configure the WiFi to work only during normal business hours and be off on weekends when the
business is closed.