Check Point QUANTUM SPARK 1600 - Getting Started with 1500, 1600, and 1800 Appliance Series; Workflow

Getting Started with 1500, 1600, and 1800 Appliance Series
Quantum Spark 1500, 1600, and 1800 Appliances R81.10.X Locally Managed Administration Guide|17
Getting Started with 1500, 1600, and
1800 Appliance Series
This Administration Guide describes:
n
Installing the appliance and connecting the cables.
n
Configuring Security Policies.
n
Configuring local users and administrators.
n
Configuring VPN.
n
Configuring a cluster.
n
Configuring advanced settings.
n
Logging and monitoring.
Workflow:
1. Install the Quantum Spark appliance and connect all cables.
See the:
n
Getting Started Guide for 1600 / 1800 Appliances .
n
Getting Started Guide for 1570R Appliances .
n
Getting Started Guide for 1570 / 1590 Appliances .
n
Getting Started Guide for 1530 / 1550 Appliances .
n
"Setting Up the Quantum Spark Appliance" on page19 .
2. Follow the applicable First Time Deployment option.
See "First Time Deployment Options" on page21 .
3. Install the required licenses.
See "Managing Licenses" on page40
4. Configure the required users and objects.
See "Managing Users and Objects" on page265 .
5. Configure required appliance settings.
See "Managing the Device" on page54 .
6. Configure and install the required Security Policies.
See:
n
"Managing the Access Policy" on page152 .
n
"Managing Threat Prevention" on page195 .
7. Make sure the appliance works as required.