Check Point QUANTUM SPARK 1600 - Access Points; Viewing Monitoring Data; Viewing Reports; Dr. Spark

Access Points
Quantum Spark 1500, 1600, and 1800 Appliances R81.10.X Locally Managed Administration Guide|309
Access Points
The Logs & Monitoring > Access Points page shows the available access points around your gateway. The
network information includes:
n
Channel
n
Frequency
n
Security
n
Signal strength
n
Signal noise
Use case:
Use this information to decide which network to connect to, and change based on your needs.
In addition, this page displays the current wireless radio frequency and channel in use and the wireless
networks configured.
Viewing Monitoring Data
See "Viewing Monitoring Data" on page46 .
Viewing Reports
See "Viewing Reports" on page48 .
Dr. Spark
With the Dr. Spark feature, you can check the Quantum Spark Appliance performance, sizing and health
status.
Note - The Dr. Spark feature is available as a separate tab starting from R81.10.08. In earlier
versions, the Dr. Spark buttons are available on the "Using System Tools" on page312 page.