Configuring VPN
Quantum Spark 1500, 1600, and 1800 Appliances R81.10.X Locally Managed Administration Guide|228
iii. Select the applicable option:
To select to receive by both SMS and email, select both checkboxes.
To receive authentication by SMS
i. Select the SMS checkbox.
ii. To use Check Point SMS, select Use Check Point SMS provider
service.
iii. If you select Use External SMS provider, enter the information for these
fields:
n
DynamicID URL.
n
Provider user name.
n
Provider password.
n
API ID.
n
Message to display (optional).
To receive authentication by Email
i. Select the Email checkbox.
ii. Optional: Enter the Message to send.
To receive authentication by SMB Cloud Service (Google Authenticator
application)
Note - Users must have Remote Access permissions configured for
this option.
i. Select the Use Google Authenticator checkbox.
ii. Click Apply.
The SMB Cloud Service sends an email that contains a QR code to the
email address configured for the user.
iii. Scan the QR code with the Google Authenticator application.
iv. The one-time password (OTP) appears.
Note - The OTP expires after 30 seconds.
v. On your computer, connect to the VPN. Enter your username and
password.
vi. For the second authentication, enter the OTP in the Response field.
vii. The Cloud Service compares the OTP to the one represented by the QR
code in the application. If it matches, you are connected to VPN.
The Cloud Service sends a QR code with an OTP when:
To Next Page
