Check Point QUANTUM SPARK 1600 - Page 233

Configuring VPN
Quantum Spark 1500, 1600, and 1800 Appliances R81.10.X Locally Managed Administration Guide|233
a. Go to Access Policy > Firewall > NAT.
b. In the section NAT Rules, click View NAT rules.
c. Click New.
d. Configure this rule:
Original
Source
Original
Destination
Original
Service
Translated
Source
Translated
Destination
Translated
Service
OMPOOL OMPOOL
*Any *Original *Original *Original
e. Click Apply.