Configuring Remote Access Users
Quantum Spark 1500, 1600, and 1800 Appliances R81.10.X Locally Managed Administration Guide|236
To add remote access permissions for users defined in the RADIUS group:
1. Click Add > RADIUS Group.
2. If no RADIUS group was defined, you are prompted to configure one.
3. Select or clear the Enable RADIUS authentication for remote access users checkbox.
4. When selected, choose which users are given remote access permissions:
n
To allow all users defined in the RADIUS server to authenticate - Select All users defined on
RADIUS server
n
Specific user groups defined in the RADIUS server - Select For specific RADIUS groups only
and enter in the text field the names of the user groups separated by commas
n
To allow administrators with read-only permissions to authenticate - Select Read-only
Administrators
5. Click Apply
The RADIUS server or specific users from the RADIUS server are added to the table on the page.
To configure remote access permissions for a user:
1. On the Remote Access Users page, click Add.
The New Local User window opens:
2. In the Remote Access tab, enter the:
n
User name.
n
Password.
n
Email.
n
Mobile phone number.
3. Select Remote Access permissions.
4. Click Apply
To configure SSL VPN bookmarks:
1. Click Add > New Local User/Users Group/Active Directory Group > SSL VPN Bookmarks tab.
A new window opens.
2. Enter new bookmarks or select existing bookmarks.
Note - If you select the Global bookmark, this bookmark always appears.
3. Click Apply
To Next Page
