Check Point QUANTUM SPARK 1600 - Page 280

Managing Authentication Servers
Quantum Spark 1500, 1600, and 1800 Appliances R81.10.X Locally Managed Administration Guide|280
To configure a RADIUS server administrator
1. Click the Users & Objects view > Users Management section > Administrators page.
2. In the line Administrator RADIUS authentication is, click Edit permissions.
3. Select Enable RADIUS authentication for administrators.
4. Select one of these:
n
Use roles defined on RADIUS server
n
Use default role for RADIUS users
a. In the Default Administrators Role, select the applicable role.
b. Optional: Select For Administrators use specific RADIUS group only.
Enter the applicable RADIUS groups.
5. Click Apply
To configure remote access permissions for users defined on the RADIUS server
1. Click the Users & Objects view > Users Management section > Administrators page.
2. Click the link in the sentence Remote access permissions for RADIUS users are disabled.
3. Select Enable RADIUS authentication for User Awareness, Remote Access and Hotspot.
4. Optional: Select For Remote Access use specific RADIUS groups only.
Enter the applicable RADIUS groups.
5. Click Apply
6. Configure the remote access permissions for RADIUS users in the VPN view > Remote Access
section > Remote Access Users page.