ECO 2 Ultrasound Diagnostic System
Page 4 / 189
Level of protection against harmful ingress of water
Parts of probe likely to come into contact with operator or patient meet the requirements of
drip-proof equipment (IPX1).
Parts of probe intended to be immersed in normal use meet the requirements of watertight
equipment (IPX7).
The IP Classification of System is Ordinary Equipment (IPX0).
Safety level when used in the presence of FLAMMABLE
ANAESTHETIC MIXED WITH AIR (or WITH OXYGEN or WITH
NITROUS OXIDE):
The Equipment is not suitable for use in the environment with FLAMMABLE ANAESTHETIC
MIXED WITH AIR (or WITH OXYGEN or WITH NITROUS OXIDE)
Mode of operation
Continuous Operation
For maximum safety, always follow these guidelines:
Proper grounding of the system is critical to avoid electrical shock. For protection, ground the
chassis with a three-wire cable and plug, and plug the system into a hospital-grade, three-hole
outlet.
Do not remove or circumvent the grounding wire.
Do not remove the protective covers on the system. These covers protect users from
hazardous voltages. Cabinet panels must remain in place while the system is in use. A qualified
electronic technician must make all internal replacements.
Do not operate this system in the presence of flammable gases or anesthetics.
All peripheral devices (unless certified as medical grade) that are connected to the system must
be powered through the electrical outlet through an optional isolation transformer.
Notice upon Installation of Product
Separation distance and effect from fixed radio communications equipment: field strengths from
To Next Page
Loading...