ECO 2 Ultrasound Diagnostic System
Page 117 / 189
Chapter 8 System Maintenance
8.1 Machine Cleaning
CAUTION: Do turn off the power before cleaning and pull out the cable from socket.
There is possibility of electric shock if the device is on.
Cleaning methods:
Use the soft dry cloth to wrap the machine. If the device is quite dirty, use wet soft cloth. After
wiping the blot, use soft dry cloth to wipe dry.
CAUTION:
1. Don’t use organic solvent such as alcohol, otherwise surface may be ruined.
2. When cleaning the machine, don’t let the liquid inflow the machine, otherwise it may
malfunction and there is a danger of electric shock.
3. When it is necessary to clean the probe connector and peripheral instrument, please contact
Sales office contact customer service or agent of CHISON. Any self-cleaning may result in
malfunction or degrading the function of device.
8.2 Safety Check
To make sure this device works normally, a piece of maintenance plan is suggested to make to
check the device regularly If any abnormal phenomena, immediately stop operation and contact
with Sale Office, Customer Service department or Agents of manufacturer.
If no image or menu but image, please check following malfunction table. If the malfunction can’t
be solved, please contact with Sale Office, Customer Service department or Agents of
manufacturer.
8.3 Malfunction Check
Switch button lights but
power LED not
Battery lose efficacy, Adapter
works irregular
Check the connector
between cable and power
To Next Page
Loading...