ECO 2 Ultrasound Diagnostic System
Page 53 / 189
Press parameter control key on [Baseline] to adjust the position of baseline, adjustment range
from 0~6.
5.9 Full Screen Show
Full screen the image area. Press [GAIN] knob to activate the function; Press [EXIT] button or
[GAIN] knob again to exit full screen show.
When full screen shows, press [MENU] knob to show the menu of current mode (except
bodymark).
5.10 Edit Comment
5.10.1 Overview
The comment is to enter text or symbols on the image, the device is Chinese and English
annotation system.
Enter COMMENT: Press enter into comments status;
Exit COMMENT: Press again or [FREEZE] key to exit;
Comment means input the words or symbols on images for making explanation. Add comments
can through keyboard input directly or using the default comments.
The default comments are classified by examination mode as follows:
Abdomen, general anatomy term
Anatomy term of Obstetrics
Anatomy term of Gynecology
Anatomy term of Small Parts
Anatomy term of Pathological Change
NOTE: If you need to custom the default comments, refer to the pre-set section.
5.10.2 Input Characters
Operation:
1. Press button, then system will go into the comment process.