Chison ECO 2 - The Key of Image Mode

ECO 2 Ultrasound Diagnostic System
Page 36 / 189
the menu, and confirm the input.
4.3.2 UPDATE
This multifunction key is work with trackball. The function switches with the unit status. Such as,
call the annotation and back in measuring.
4.3.3 Exit
Press this key can exit measurement, dialog, and menu.
4.3.4 Cursor
Press this key to show or hide the cursor.
4.3.5 Change
Press this key to change the menu.
4.3.6 Dist
Press this key to enter into distance measurement.
4.3.7 Trace
Press this key to enter into trace measurement, and press UPDATE to change between trace and
ellipse.
4.3.8 Calc
Press this key to enter into measurement software package.
4.3.9 MENU
Press MENU-knob for second time to select the item and adjust the parameters. Press
MENU-knob for third time to exit from current item. Rotate the MENU- knob to select the item.
4.3.10 Trackball
Trackball is the main operation tool on screen. Position calipers in measurement, the function of
the trackball is different under diverse working status.