Chison ECO 2 - Page 61

ECO 2 Ultrasound Diagnostic System
Page 52 / 189
Activate [Enhance] and rotate [MENU] to adjust Enhance, adjustment range from 0~3.
5.8.5 D Gamma
Adjust D Gamma.
Activate D gamma and rotate [MENU] to adjust D Gamma, adjustment range from 0~8.
5.8.6 Dynamic
Adjust Dynamic.
Activate [Dynamic] and rotate [MENU] to adjust Dynamic, adjustment range from 0~7.
5.8.7 Pixel Ratio
Adjust Pixel Ratio.
Activate [Pixel Ratio] and rotate [MENU] to adjust Pixel Ratio, adjustment range from 0~7.
5.8.8 Color Map
Change type of color map.
Activate [Color map] and rotate [MENU] to adjust D color map, adjustment range from 0~8.
5.8.9 Acoustic power
Change acoustic power.
Activate [Acoustic power] and rotate [MENU] to adjust acoustic power, adjustment range from
0~10.
5.8.10 Invert
Press parameter control key on Invert, or press key to invert spectrum.
5.8.11 Wall Filter
Press parameter control key on [Wall Filter] to adjust wall filter, adjustment range from 0~3.
5.8.12 Speed
Press parameter control key on [Speed] to adjust speed, adjustment range from 0~2.
5.8.13 PRF
Adjust PRF.
Press parameter control key on [PRF] to adjust PRF, adjustment range from 0~15.
5.8.14 Baseline
Adjust the position of baseline.