Chore-Tronics 2 Control User Manual

Chore-Tronics® 2 Control Introduction to the Control
MT1843B
8
Alphanumeric Keypad
The Alphanumeric Keypad is used to enter a number directly into a field without
having to scroll to the number. To directly enter a number, press the Edit Key and
highlight the desired field to be changed. Next type in the desired value of the field
and either press the Enter Key or press the down navigation arrow. The new value
should now be in place.
The Alphanumeric Keypad can also be used to change the name of some text fields.
To change a text field name press the Edit Key and highlight the desired field to be
changed. (In the example below, Drinker 1 is highlighted). Next, enter the new letters
into the text field by pressing the appropriate number on the Key Pad. (In the example
below we are changing it to read Brood). The first letter above each Key is chosen by
pushing that Key once. To choose the second letter above each Key, push that Key
twice. In our example the letter B is chosen by pressing the #2 button two times in a
row. The letter R is chosen by pressing the #7 button three times in a row. Allow a
pause of 1-2 seconds in between letters.
MT1842-055 10/04
73.0
O
L
I
X
W
Y
Y
T
V
U
Q
P
R
S
N
M
J
K
G
H
D
F
E
ENTER
A
B
C
4
1
78
5
2
9
6
3
.0
UNDO
EDIT
+
-
1) Press the Edit Key and highlight
the number you want to change.
2) Press the desired number on the
Alphanumeric Keyboard.
3) Push the Enter Key or the down
Navigation Arrow.
O
L
I
X
W
Y
Y
T
V
U
Q
P
R
S
N
M
J
K
G
H
D
F
E
ENTER
A
B
C
4
1
78
5
2
9
6
3
.0
UNDO
Figure 3. Alphanumeric Keypad
MT1842-044 10/04
Enter new letters into the field by
pressing the appropriate numbers on
the keypad.
Select Drinker 1
Drinker 1 has been successfully
changed to "Brood".
Figure 4. Changing Text Fields

Chore-Tronics 2 Control Specifications

General

Brand	Chore-Tronics
Model	2 Control
Category	Control Unit
Language	English