Chore-Tronics 2 Control User Manual

Chore-Tronics® 2 Control Introduction to the Control
MT1843B
13
Entering Time and Date using the Numeric Keypad
You can enter the current Time and Date using the Numeric Keypad.
MT1843-001 3/05
MT1843-002 3/05
8:12 pm
1. Press BUTTON 13.
The Setup-General screen appears (Figure
13).
2. Press the EDIT button and use down arrow to
highlight the Time of day (Figure 14). Using the
Numeric Keypad, enter in the correct hour followed
by the decimal key (.). Enter the correct minutes fol-
lowed by either; am or pm (Use the number 2 on the
Keypad for am, or the number 7 for pm). The exam-
ple below is setting the time to 8:12 pm.
Q
P
R
S
7
1
T
V
U
8
.
A
B
C
2
Hour=8 decimal (.) Minutes=12
then thenthen then then
pm=7
8 8: 8:12
8:12pm
Figure 13. Setup General Screen.
MT1842-061 10/04
Figure 14. Changing Time of Day.
2. Press the EDIT button and use down arrow to
highlight the Date (Figure 15). Using the Numeric
Keypad, enter in the correct day, followed by the
decimal key (.). Then enter the correct month, fol-
lowed by the decimal key (.). Finally, enter the cor-
rect year. The example below is setting the date to
February 7th, 2005.
Q
P
R
S
7
.
A
B
C
2
Day=7
decimal (.)
then then then then
Year=2005
0
.
L
J
K
5
Month =2 decimal (.)
7 7 Feb
7 Feb 2005
7 Feb 2005
Figure 15. Changing the Date.
Use the same procedure to set "Start" and "Stop" times in any of the Clock Screens.

Chore-Tronics 2 Control Specifications

General

Brand	Chore-Tronics
Model	2 Control
Category	Control Unit
Language	English