Cisco 3905 Administration Guide

APPENDIX E
Cisco Unified SIP Phone 3905 Wall Mount
This appendix contains information on installing the wall mount for use with the Cisco Unified SIP Phone
3905.
•
Items Required for Wall Mount, page 111
•
Install Phone on Wall Mount Plate, page 112
•
Adjust Handset Rest, page 116
Items Required for Wall Mount
The following section describes how to install the Wall Mount plate for use with the Cisco Unified SIP Phone
3905.
Cisco recommends that you use the Leviton Wall Mount plate (Leviton type number: 4108W-0SP) for mounting
the Cisco Unified SIP Phone 3905. The wall mount plate must be ordered separately from the phone.
Cisco Unified SIP Phone 3905 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
111

Cisco 3905 Specifications

General

Speakerphone	Yes
Ethernet Switch	No
Handset	Standard
Protocol Support	SIP
Lines	1
Headset Port	No
Power over Ethernet (PoE)	IEEE 802.3af Class 1
Ethernet Ports	2