•
Network Setup: Displays network configuration information and information about other phone settings.
•
Network Statistics: Includes the following hyperlinks, which provide information about network traffic:
•
Ethernet Information: Displays information about Ethernet traffic.
•
Network (Port): Displays information about network traffic to and from the network port on the
phone.
•
Device Logs: Includes the following hyperlinks, which provide information that you can use for
troubleshooting:
•
Console Logs: Includes hyperlinks to individual log files.
•
Core Dumps: Includes hyperlinks to individual dump files.
•
Status Messages: Displays up to 30 of the most recent status messages that the phone has generated
since it was last powered up.
•
Streaming Statistics: Includes the following hyperlink:
•
Stream: Displays a variety of streaming statistics.
Related Topics
Device Information Fields, on page 65
Network Setup Page, on page 66
Network Statistics Page, on page 70
Device Logs, on page 71
Streaming Statistics, on page 75
Access Phone Web Page
To access the web page for a Cisco Unified IP Phone, perform these steps.
If you cannot access the web page, it may be disabled. See the Disable and Enable Web Page Access, on
page 65 for more information.
Note
Procedure
Step 1
Obtain the IP address of the Cisco Unified IP Phone using one of these methods:
•
Search for the phone in Cisco Unified Communications Manager by choosing Device > Phone. Phones
registered with Cisco Unified Communications Manager display the IP address on the Find and List
Phones window and at the top of the Phone Configuration window.
Cisco Unified SIP Phone 3905 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
64
Remote Monitoring
Access Phone Web Page
To Next Page
Loading...
Need help?
General
