Cisco 3905 Administration Guide

To ChangeDescriptionOption
Device ID is not editable.
Device ID: A derivative of the phone’s
model number and unique MAC
address displayed in this format:
CP-<model>-SEP-<MAC>
EAP-MD5
See Set Shared Secret Field, on page 46.Shared Secret: Choose a password to
use on the phone and on the
authentication server. The password
must be between 6 and 32 characters,
consisting of any combination of
numbers or letters.
If you disable 802.1X
authentication or perform a
factory reset of the phone, the
shared secret is deleted.
Note
To view the realm details of your 802.1X
Authentication, choose Applications >
Admin Settings > Security > 802.1X
Authentication > EAP-MD5 > Realm.
Realm: Indicates the user network
domain, always set as Network.
To view the transaction status of your
802.1X Authentication, choose
Applications > Admin Settings > Security
> 802.1X Authentication Status.
Displays the transaction status of your
802.1X Authentication.
Transaction Status
Set Device Authentication Field
Procedure
Step 1
Choose Applications > Admin Settings > Security > 802.1X Authentication > Device Authentication.
Step 2
Press Select.
Step 3
Set the Device Authentication option to Enabled or Disabled.
Step 4
Press Select to confirm.
Cisco Unified SIP Phone 3905 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
45
Cisco Unified IP Phone Settings
Set Device Authentication Field

Cisco 3905 Specifications

General

Speakerphone	Yes
Ethernet Switch	No
Handset	Standard
Protocol Support	SIP
Lines	1
Headset Port	No
Power over Ethernet (PoE)	IEEE 802.3af Class 1
Ethernet Ports	2