Cisco 3905 Administration Guide

CHAPTER 4
Cisco Unified IP Phone Settings
The Cisco Unified IP Phone includes many configurable network settings that you may need to modify
before the phone is functional for your users. You can access these settings, and change some of them,
through menus on the phone. Settings that are display-only on the phone are configured in Cisco Unified
CM Administration.
This chapter includes the following topics:
•
Configuration Menus, page 35
•
Network Setup Menu, page 37
•
IPv4 Setup Menu Options, page 41
•
Security Configuration Menu, page 44
Configuration Menus
The Cisco Unified IP Phone includes the following configuration menus:
•
Network Setup: Provides options for viewing and making a variety of network settings.
•
IPv4 Configuration: A sub-menu of the Network Setup menu, the IPv4 menu items provide additional
network options for viewing and setting.
Before you can change option settings on the Network Setup menu, you must unlock options for editing.
You can control whether a phone user has access to phone settings by using the Settings Access field in the
Cisco Unified CM Administration Phone Configuration window.
Display Configuration Menu
To display a configuration menu, perform the following steps.
Cisco Unified SIP Phone 3905 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
35

Cisco 3905 Specifications

General

Speakerphone	Yes
Ethernet Switch	No
Handset	Standard
Protocol Support	SIP
Lines	1
Headset Port	No
Power over Ethernet (PoE)	IEEE 802.3af Class 1
Ethernet Ports	2