•
Physical location of the phone
•
Name or user ID of phone user
•
Device pool
•
Partition, calling search space, and location information
•
Associated directory number (DN) to assign to the phone
•
Cisco Unified Communications Manager user to associate with the phone
The information provides a list of configuration requirements for setting up phones and identifies preliminary
configuration that you need to perform before configuring individual phones.
For more information, see the Cisco Unified IP Phones chapter in the Cisco Unified Communications Manager
System Guide and the Available telephony features, on page 47.
Step 2
Verify that you have sufficient unit licenses for your phone.
For more information, go to the License Unit Report chapter in the Cisco Unified Communications Manager
Administration Guide.
Step 3
Add and configure the phone by completing the required fields in the Phone Configuration window. Required
fields are indicated by an asterisk (*) next to the field name; for example, MAC address and device pool.
The device with its default settings gets added to the Cisco Unified Communications Manager database.
For more information, go to the Cisco Unified IP Phone Configuration chapter in the Cisco Unified
Communications Manager Administration Guide.
For information about Product Specific Configuration fields, refer to ? Button Help in the Phone Configuration
window.
If you want to add both the phone and user to the Cisco Unified Communications Manager database
at the same time, go to the User/Phone Add Configuration chapter in the Cisco Unified
Communications Manager Administration Guide
Note
Step 4
Add and configure directory numbers (line) on the phone by completing the required fields in the Directory
Number Configuration window. Required fields are indicated by an asterisk (*) next to the field name; for
example, directory number and presence group.
For more information, go to the Directory Number Configuration chapter in the Cisco Unified Communications
Manager Administration Guide and see Available telephony features, on page 47.
Step 5
Add user information by configuring required fields. Required fields are indicated by an asterisk (*); for
example, User ID and last name.
Assign a password (for User Options web pages) and
PIN.
Note
Adds user information to the global directory for Cisco Unified Communications Manager.
For more information, go to the End User Configuration chapter in the Cisco Unified Communications Manager
Administration Guide and see Add Users to Cisco Unified Communications Manager, on page 53.
If you want to add both the phone and user to the Cisco Unified Communications Manager database
at the same time, go to the User/Phone Add Configurations chapter in the Cisco Unified
Communications Manager Administration Guide.
Note
Step 6
Associate a user to a user group. This step assigns users a common list of roles and permissions that apply to
all users in a user group. Administrators can manage user groups, roles, and permissions to control the level
of access (and, therefore, the level of security) for system users.
In order for end users to access Cisco Unified CM User Options, you must add users to the standard
Cisco CCM End Users group.
Note
Cisco Unified SIP Phone 3905 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
16
Cisco Unified IP Phone
Cisco Unified IP Phones Setup in Cisco Unified Communications Manager
To Next Page
Loading...
Need help?
General
