Cisco 3905 Administration Guide

Cisco Unified Communications Manager Administration also provides several service parameters that
you can use to configure various telephony functions. For more information on accessing and configuring
service parameters, refer to Cisco Unified Communications Manager Administration Guide.
For more information on the functions of a service, select the name of the parameter or the question mark
help button in the Service Parameter Configuration window.
Note
Table 9: Telephony features for the Cisco Unified IP Phone
Configuration referenceDescriptionFeature
For more information, see the Cisco
Unified Communications Manager
System Guide, “Cisco Unified IP Phone”
chapter.
A stutter tone from the handset or
speakerphone indicates that a user
has one or more new voice messages
on a line.
Audible Message Waiting
Indicator (AMWI)
For more information, see the Cisco
Unified Communications Manager
Administration Guide, “Directory
Number Configuration” chapter.
Connects incoming calls
automatically after a ring or two.
Auto Answer works with the
speakerphone.
Auto Answer
For more information, see the Cisco
Unified Communications Manager
Features and Services Guide, “External
Call Transfer Restrictions” chapter.
Prevents users from transferring an
external call to another external
number.
Block External to External
Transfer
For more information, see:
•
Cisco Unified Communications
Manager Administration Guide,
“Directory Number
Configuration” chapter
•
Cisco Unified Communications
Manager System Guide, “Cisco
Unified IP Phone” chapter
•
Customize User Options Web
Pages Display, on page 55
Allows users to redirect incoming
calls to another number. The Call
Forward All option is supported.
You will hear a stutter tone after
off-hook if Call Forward All feature
is configured on your phone.
Call Forward
For more information, see the Cisco
Unified Communications Manager
System Guide, “Cisco Unified IP Phone”
chapter.
Detects and prevents Call Forward
All loops. When a Call Forward All
loop is detected, the Call Forward
All configuration is ignored and the
call rings through.
Call Forward All Loop
Breakout
Cisco Unified SIP Phone 3905 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
48
Features, Templates, Services, and Users
Available telephony features

Cisco 3905 Specifications

General

Speakerphone	Yes
Ethernet Switch	No
Handset	Standard
Protocol Support	SIP
Lines	1
Headset Port	No
Power over Ethernet (PoE)	IEEE 802.3af Class 1
Ethernet Ports	2