Contents
iv
Cisco 7600 Series Router Installation Guide
OL-4503-26
PEM 1-32
CHAPTER
2 Preparing for Installation 2-1
Safety 2-2
Supported Line Cards on 7600 Chassis 2-2
Site Requirements 2-4
Preventing Electrostatic Discharge Damage 2-4
Environmental Requirements 2-4
Power Requirements 2-20
Power Connection Guidelines 2-21
AC-Powered Systems 2-21
DC-Powered Systems 2-33
Site Planning Checklist 2-34
CHAPTER
3 Installing the Cisco 7600 Series Router 3-1
Unpacking the Router 3-2
Installation Guidelines 3-3
Required Tools 3-4
Installing the Shelf Brackets and Crossbar Bracket 3-4
Installing the Chassis Brackets 3-5
Installing the Router Chassis in the Rack 3-9
Installing the Stabilizer Kit (Cisco 7609 Router, Cisco 7609-S, and Cisco 7613 Router Only) 3-13
Installing the Cable Management System (Cisco 7609 Router and Cisco 7609-S Router Only) 3-15
Replacing the Cable Guide 3-17
System Ground Connection 3-19
Required Tools and Equipment 3-20
Connecting the System Ground 3-24
Installing the Power Supplies in the Router Chassis 3-25
Attaching the Interface Cables 3-25
Connecting the Supervisor Engine Console Port 3-26
Connecting the Supervisor Engine Uplink Ports 3-27
Connecting to the Interface Ports 3-28
Verifying Router Chassis Installation 3-30
CHAPTER
4 Troubleshooting 4-1
Getting Started 4-1
Problem Solving to the System Component Level 4-2
To Next Page
Loading...
Need help?
General
