Cisco 7600-SIP-400 - SPA Interface Processor 400 - Page 65

2-9
Cisco 7600 Series Router Installation Guide
OL-4503-26
Chapter 2 Preparing for Installation
Site Requirements
Table 2-6 lists the power and the heat numbers for the Distributed Forwarding Cards (DFCs).
VS-F6K-PFC3C
Policy Feature Card 3C
1.90 79.80 99.75 340.65 107.26 366.29
VS-F6K-PFC3CXL
Policy Feature Card 3CXL
2.50 105.00 131.25 448.22 141.13 481.96
Table 2-5 Power Requirements and Heat Dissipation—Policy Feature Cards (PFCs)
Model Number/
Module Type
Module
Current (A)
Module
Power
(Watts)
AC DC
AC-Input
Power
(Watts)
Heat Diss.
(BTU/HR)
DC-Input
Power
(Watts)
Heat Diss.
(BTU/HR)
Ta b l e 2-6 Power Requirements and Heat Dissipation—Distributed Forwarding Cards (DFCs)
Model Number/
Module Type
Module
Current (A)
Module
Power
(Watts)
AC DC
AC-Input
Power
(Watts)
Heat Diss.
(BTU/HR)
DC-Input
Power
(Watts)
Heat Diss.
(BTU/HR)
WS-F6K-DFC
Distributed Forwarding Card
2.10 88.20 110.25 376.50 118.55 404.84
WS-F6K-DFC3A
Distributed Forwarding Card 3A
2.57 107.94 134.93 460.77 145.08 495.45
WS-F6K-DFC3B
Distributed Forwarding Card 3B
1.67 70.14 87.68 299.41 94.27 321.95
WS-F6K-DFC3BXL
Distributed Forwarding
Card
3BXL
2.38 99.96 124.95 426.70 134.35 458.82
WS-F6700-CFC
Centralized Forwarding Card
0.75 31.5 39.38 134.47 42.34 144.59