Configuration ReferenceDescriptionFeature
For more information, see Cisco Unified
Communications Manager System Guide,
“Cisco Unified IP Phone” chapter.
Prevents a user from configuring a Call Forward
All destination directly on the phone that creates a
Call Forward All loop or that creates a Call Forward
All chain with more hops than the existing Forward
Maximum Hop Count service parameter allows.
Call Forward All Loop Prevention
For more information, see the following:
•
Cisco Unified Communications
Manager Administration Guide,
“Directory Number Configuration”
•
Cisco Unified Communications
Manager System Guide, “Cisco
Unified IP Phone”
Allows you to specify information that appears on
a phone when a call is forwarded. This information
can include the caller name, caller number,
redirected number, and original dialed number.
Call Forward Configurable
Display
For more information, see the Cisco Unified
Communications Manager System Guide,
“Understanding Directory Numbers”
chapter.
Allows you to override Call Forward All (CFA) in
cases where the CFA target places a call to the CFA
initiator. This feature allows the CFA target to reach
the CFA initiator for important calls. The override
works whether the CFA target phone number is
internal or external.
Call Forward Destination Override
For more information, see Call Forward
Notification setup.
Allows you to configure the information that the
user sees when receiving a forwarded call.
Call Forward Notification
For more information, see Enable Call
History for shared line.
Allows you to view shared line activity in the phone
Call History. This feature will:
•
Log missed calls for a shared line
•
Log answered calls for a shared line
Call History for Shared Line
For more information, see the Cisco Unified
Communications Manager Features and
Services Guide, “Call Park and Directed
Call Park” chapter.
Allows users to park (temporarily store) a call and
then retrieve the call by using another phone in the
Cisco Unified Communications Manager system.
Call Park
For more information, see the Cisco Unified
Communications Manager Features and
Services Guide, “Call Pickup” chapter.
Allows users to redirect a call that is ringing on
another phone within their pickup group to their
phone.
You can configure an audio and visual alert for the
primary line on the phone. This alert notifies the
users that a call is ringing in their pickup group.
Call Pickup
Cisco Unified IP Conference Phone 8831 Administration Guide for Cisco Unified Communications Manager 9.0
79
Features, templates, services, and user setup
Available telephony features
To Next Page
Loading...
