Configuration ReferenceDescriptionFeature
For more information, see Cisco Unified
Communications Manager Features and
Services Guide, “Monitoring and
Recording” chapter.
Allows a supervisor to record an active call. The
user might hear a recording audible alert tone during
a call when it is being recorded.
When a call is secured, the security status of the
call is displayed as a lock icon on Cisco Unified IP
Phones. The connected parties might also hear an
audible alert tone that indicates the call is secured
and is being recorded.
When an active call is being monitored or
recorded, you can receive or place
intercom calls; however, if you place an
intercom call, the active call will be put on
hold, which causes the recording session
to terminate and the monitoring session to
suspend. To resume the monitoring
session, the party whose call is being
monitored must resume the call.
Note
Call Recording
For more information, see:
•
Cisco Unified Communications
Manager System Guide,
“Understanding Directory Numbers”
•
Phone Call Waiting setup
Indicates (and allows users to answer) an incoming
call that rings while on another call. Incoming call
information appears on the phone display.
Call Waiting
For more information, see:
•
Cisco Unified Communications
Manager Administration Guide,
“Cisco Unified IP Phone
Configuration”
•
Cisco Unified Communications
Manager System Guide,
“Understanding Route Plans”
•
Cisco Unified Communications
Manager Features and Services
Guide, “Call Display Restrictions”
•
Cisco Unified Communications
Manager Administration Guide,
“Directory Number Configuration”.
Caller identification such as a phone number, name,
or other descriptive text appear on the phone
display.
Caller ID
Cisco Unified IP Conference Phone 8831 Administration Guide for Cisco Unified Communications Manager
9.0
80
Features, templates, services, and user setup
Available telephony features
To Next Page
Loading...
Need help?
General
