Configuration ReferenceDescriptionFeature
For more information about configuring
this feature, see Cisco Unified
Communications Manager Features and
Services Guide, “Hold Reversion” chapter.
Limits the amount of time that a call can be on hold
before reverting back to the phone that put the call
on hold and alerting the user.
Reverting calls are distinguished from incoming
calls by a single ring (or beep, depending on the
new call indicator setting for the line). This
notification repeats at intervals if not resumed.
A call that triggers Hold Reversion also displays
an animated icon in the call bubble.
You can configure call focus priority to favor
incoming or reverting calls.
Hold Reversion
No configuration is required.Enables phones with a shared line to distinguish
between the local and remote lines that placed a
call on hold.
Hold Status
•
Requires no configuration, unless you
want to use Music On Hold. See
“Music On Hold” in this table for
information.
• See “Hold Reversion” in this table.
Allows the user to move a connected call from an
active state to a held state.
Hold/Resume
No configuration is required.Enhances the file download process to the phone
to use HTTP by default. If the HTTP download
fails, the phone reverts to using the TFTP download.
HTTP Download
No configuration required.The Jitter Buffer feature handles jitter from 10
milliseconds (ms) to 1000 ms for both audio and
video streams.
Jitter Buffer
For more information see:
•
Cisco Unified IP Conference Phone
8831 User Guide, “Conference Phone
Link Mode”
Enhances the audio coverage area by using a daisy
cable to connect two conference phone Sound Base
units.
When linked, voice, dial tone, ringer and base LED
features are synchronized between the two devices.
Linked Mode
For more information, see:
•
Cisco Unified Communications
Manager System Guide, “Cisco
Unified IP Phone”
•
Cisco Unified Communications
Manager Features and Services
Guide, “Malicious Call Identification”
Allows users to notify the system administrator
about suspicious calls that are received.
Malicious Caller Identification
(MCID)
Cisco Unified IP Conference Phone 8831 Administration Guide for Cisco Unified Communications Manager
9.0
84
Features, templates, services, and user setup
Available telephony features
To Next Page
Loading...
