Configuration ReferenceDescriptionFeature
To configure the parameter in the Cisco
Unified Communications Manager
Administration application, choose Device
> Phone, select the appropriate IP phone,
and scroll to the Product Specific
Configuration Layout pane (Switch Port
Remote Configuration or PC Port Remote
Configuration).
To configure the setting on multiple phones
simultaneously, configure the remote
configuration in either Enterprise Phone
Configuration (System > Enterprise
Phone Configuration) or Common Phone
Profile Configuration (Device > Device
Settings > Common Phone Profile.
(Switch Port Remote Configuration or PC
Port Remote Configuration)
Allows the administrator to configure the speed and
duplex function of the phone Ethernet ports
remotely by using Cisco Unified Communications
Manager Administration. This enhances the
performance for large deployments with specific
port settings.
If the ports are configured for Remote Port
Configuration in Cisco Unified
Communications Manager, the data cannot
be changed on the phone.
Note
Remote Port Configuration
For more information, see the following:
•
Cisco Unified Communications
Manager Administration Guide,
“Directory Number Configuration”
•
Cisco Unified Communications
Manager Administration Guide,
“Custom Phone Rings”
Identifies ring type used for a line when a phone
has another active call.
Ringtone Setting
For more information about security, see
<xref Supported Security Features>.
For additional information, see the
following:
•
Cisco Unified Communications
Manager System Guide, “Conference
Bridges”
•
Cisco Unified Communications
Manager Administration Guide,
“Conference Bridge Configuration”
•
Cisco Unified Communications
Manager Security Guide
•
Allows secure phones to place conference
calls using a secured conference bridge.
•
As new participants are added by using Conf,
Join, cBarge, Barge softkeys or MeetMe
conferencing, the secure call icon displays as
long as all participants use secure phones.
•
The Conference List displays the security
level of each conference participant. Initiators
can remove nonsecure participants from the
Conference List. (Non-initiators can add or
remove conference participants if the
Advanced Adhoc Conference Enabled
parameter is set.)
Secure Conference
Cisco Unified IP Conference Phone 8831 Administration Guide for Cisco Unified Communications Manager
9.0
88
Features, templates, services, and user setup
Available telephony features
To Next Page
Loading...
Need help?
General
